10000mAh 3.7v 3C Lithium Lipo Polymer Battery Rechargeable for Project Arduino

10000mAh 3.7v 3C Lithium Lipo Polymer Battery Rechargeable for Project Arduino
10000mAh 3.7v 3C Lithium Lipo Polymer Battery Rechargeable for Project Arduino
10000mAh 3.7v 3C Lithium Lipo Polymer Battery Rechargeable for Project Arduino
10000mAh 3.7v 3C Lithium Lipo Polymer Battery Rechargeable for Project Arduino
10000mAh 3.7v 3C Lithium Lipo Polymer Battery Rechargeable for Project Arduino
10000mAh 3.7v 3C Lithium Lipo Polymer Battery Rechargeable for Project Arduino
10000mAh 3.7v 3C Lithium Lipo Polymer Battery Rechargeable for Project Arduino
10000mAh 3.7v 3C Lithium Lipo Polymer Battery Rechargeable for Project Arduino
10000mAh 3.7v 3C Lithium Lipo Polymer Battery Rechargeable for Project Arduino
10000mAh 3.7v 3C Lithium Lipo Polymer Battery Rechargeable for Project Arduino

10000mAh 3.7v 3C Lithium Lipo Polymer Battery Rechargeable for Project Arduino

This 3.7V Lipo Battery 10000mAh Lithium Rechargeable Battery's Connector is PH2.0, it can be used for Raspberry Pi UPS board whose plug is PH2.0 and other project equipment with PH2.0 port. Specification: Standard Voltage: 3.7V Capacity: 10000mAh Max Working Current: 3A Dimensions(±2mm): 112 65 8.8mm / 4.41 2.56 0.35inch(LWH) Overcurrent Protection: about 1.8-2.1A Type of Connector: PH2.0 Weight : 155g Standard Charging Method: Charging this battery to 4.25V at 0.2C constant current, then charge the battery at a constant voltage of 4.2V till it's charging current?

10000mAh 3.7v 3C Lithium Lipo Polymer Battery Rechargeable for Project Arduino. 3.7V Lipo Battery 10000mAh Lithium Rechargeable Battery 9065115 with Micro PH2.0 Plug for Raspberry Pi UPS Board. Note: The maximum operating current of this 3.7V 10000mAh lipo battery is only about 3A, can not be used for unmanned aerial vehicles, model aircraft or power tools and other products that require high current.

Application: This 1S 10000mAh lipo batteries can be used for Raspberry Pi UPS board whose plug PH2.0. Safety: Passed the MSDS test and the UN 38.3 test recognized by the United Nations to ensure that the chemical substances are not exceeded, and the use is safe and reliable.

Specification: Material: Lithium Rechargable Battery, Voltage: 3.7V, Capacity: 10000mAh, Discharge: 1C, Plug: PH2.0. Constant current, then charge the battery at a constant voltage of 4.2V till it's charging current? Dimensions(±2mm): 112 65 8.8mm / 4.41 2.56 0.35inch(LWH). Overcurrent Protection: about 1.8-2.1A.

Type of Connector: PH2.0. Standard Charging Method: Charging this battery to 4.25V at 0.2C constant current, then charge the battery at a constant voltage of 4.2V till it's charging current? Standard Voltage: 3.7V Capacity: 10000mAh Max Working Current: 3A Dimensions(±2mm): 112 65 8.8mm / 4.41 2.56 0.35inch(LWH) Overcurrent Protection: about 1.8-2.1A Type of Connector: PH2.0 Weight : 155g. Charging this battery to 4.25V at 0.2C constant current, then charge the battery at a constant voltage of 4.2V till it's charging current?

We stand behind every product we sell. Thanks for your trust and understanding in advance. Hope you have a good shopping experience in my store.

Thank you so much for your support!


10000mAh 3.7v 3C Lithium Lipo Polymer Battery Rechargeable for Project Arduino


Lipo Battery Mah    Sitemap    Contact Us    Privacy Policy Agreement    Terms of Use